SHAFTSTIK® Golf Club Shaft Extension Kit Inc Epoxy / Glass Beads / Mixing Sticks & Boards
Standard Price
£24.95
If you require any equipment or tools that you do not see in our store please get in touch for a quote.
SHAFTSTIK is owned and operated by PGA Advanced Professionals who have over 30 years of experience in Golf Club repairs and Custom-Fitting.
We offer expert advice to all our customers and offer top quality customer service.
Product Details
SHAFTSTIK® Golf Club Shaft Extension Kit
Everything you need to extend up to 10 Clubs (only includes 1 Shaft Extension) Please order more extensions if you require them.
SHAFTSTIK® Golf Club Shaft Extension Kit includes the following:
- SHAFTSTIK® Two-Part High Impact Rapid Extension Epoxy (25ml). (Enough to do 10 Extensions)
- SHAFTSTIK® Glass Shafting Beads (15g / 0.53oz). (Enough to do 10 Extensions)
- SHAFTSTIK® Epoxy Mixing Sticks (20).
- SHAFTSTIK® Premium Epoxy Mixing Boards and Golf Club Specification Cards (4).
- SHAFTSTIK® High Impact Resin Shaft Extension X 1 (Order more if you require them)
Items Specifications and instructions:
SHAFTSTIK® ‘DON’T LOSE YOUR HEAD SHAFT EXTENSION GLUE’ exclusively available to every club maker and golf workshop and enthusiast across Europe.
SHAFTSTIK® ‘DON’T LOSE YOUR HEAD SHAFT EXTENSION GLUE’ is a two-part rapid fast-setting ‘high impact’ toughened’ adhesive developed specifically for use to with a wide variety of substrates such as, plastic and steel shaft extensions, used in conjunction with steel golf club shafts, graphite golf shafts and other materials associated with golf club components.
Professional’s and Custom-Fit Workshops use this every day for building and extending golf clubs. It has been tried, tested, and improved over many years and has sold over 1m+ units worldwide. The formula makes this one of the best solutions for golf club extensions available. Designed to get the golfer back on the course in rapid time!
It cures rapidly at room temperature within 3 minutes and is fully cured after 10 minutes, allowing you to handle, continue work and use/play with the club with confidence after a very short period of time.
After 10 minutes you can work on, or use/play with the golf club as required, such as re-gripping, painting and making loft and lie adjustments without sacrificing valuable workshop time or overall strength of the bond. Ideal for those that need a fast setting toughened epoxy and need to be ready for play after only 10 minutes.
‘So don’t lose your head’ and use SHAFTSTIK with the upmost confidence!
Typical Curing Properties
Mix ratio by volume 1:1
Maximum gap fill 2 mm
Usable / pot life @23°C 3 mins
Handling time @23°C 3 mins
Working strength @ 10 mins
Full cure @23°C 10 mins
Dries Semi-Clear/ Off white
An increase of 8°C in temperature will halve the cure time. Lower temperatures will result in a slower cure time.
Golf Shaft Preparation: Surfaces/Shafts/Extensions should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces if required. Most shafts and surfaces will benefit from light abrasion with emery cloth / sanding belts (or similar), to remove any oxide layer and provide a better bond by creating a key. All chrome and shiny surfaces should be removed.
Directions for Use: 1. Dual cartridges: Remove the cartridge cap and push any air out of the tubes and dispense epoxy until both sides are flowing equally. 2. Mix equal amounts for approximately 30 seconds. 3. Apply the epoxy to one or both components. 4. Join the parts and apply a firm pressure, a slight twist on insertion is recommended but not after the epoxy starts to cure, secure components if possible. 5. Parts must be joined within 3 minutes of mixing the two epoxy components. 6. Large quantities and/or higher temperature will decrease the usable mix time life. 7. Full cure will be obtained after 10 minutes at 23°C. Heat can be used to accelerate the curing process but always remember the saying in club making ‘longer is stronger’. Allow a minimum of 10 minutes before using the golf club. Note: This epoxy can be used with our glass shafting beads to further strengthen the bond.
Safety Guidelines:
Use in accordance with the safety data sheet (provided on request) and/or the guidelines as per the label/s on the product. For further assistance with this product call our helpline on +44 (1952 743 038).
Shelf life and Storage Store in a cool dry place in an air tight container and replace cap straight after use, always keep upright when storing. Follow all the guidelines within the safety data sheet (available on request). If stored correctly this product has a shelf life for a period of 6 months.
SHAFTSTIK® ‘Don’t lose your head’ Golf Shafting Glass Beads
Product Details:
SHAFTSTIK Golf Shafting Glass Beads can be added to any of the SHAFTSTIK® two-part epoxies when you have a loose-fitting shaft or wanting to increase the strength of the fit.
By adding a small amount when mixing the epoxy, it will assist in keeping the shaft centered and add to the mechanical and structural strength of the bond.
SHAFTSTIK Golf Glass Shafting Beads are .002” glass oxide granules that are helpful in stabilising and properly centering the shaft in the hosel of the club-head.
SHAFTSTIK Golf Glass Shafting Beads can help increase the viscosity, cushions impact, increases structural and mechanical strength while also reducing shaft tip breakages.
DO NOT exceed 2% to 4% mix ratio of SHAFTSTIK Golf Shafting Glass Beads to SHAFTSTIK® epoxy.
SHAFTSTIK Golf Shafting Beads come in two sizes:
- 15g – 0.53oz –– Suitable for a set of (10 Clubs)
- 112g – 4oz – Suitable for higher volumes of re-shafting. (90 Clubs)
Features and Benefits:
Increases strength of fit.
Keeps golf shaft centered.
Adds to the mechanical structure to the overall bond.
Stabilises the overall fit.
Cushions Impact
Reduces tip breakage.
Directions:
Add the Glass Beads to the epoxy prior to mixing parts A and B.
Mix two-part epoxy and add a recommended mix ratio of 2% Glass Beads to 98% epoxy.
DO NOT exceed 4% to 96% Epoxy as this may compromise the bond.
DO NOT remix.
Follow all Epoxy instructions when mixing.
Safety Guidelines:
Avoid contact with eyes, wash thoroughly if contact is made.
Wash thoroughly with soap and water if contact is made with skin.
If swallowed seek medical advice.
Keep away from children.
Use in accordance with the safety data sheet (provided on request) and/or the guidelines as per the label/s on the product. For further assistance with this product call our helpline on +44 (1952 743 038).
Shelf life and Storage Store in a cool dry place in an airtight container and replace cap straight after use, always keep upright when storing. Follow all the guidelines within the safety data sheet (available on request). If stored correctly this product has a shelf life for a period of 12 months.
SHAFTSTIK® Golf Glue Epoxy Adhesive Mixing Sticks & Boards
Product Details:
SHAFTSTIK Golf Glue Mixing Sticks are ideal for mixing all glues, adhesives, and epoxy resins. When mixing a two-part A and B part epoxy our mixing sticks are ideal.
The mixing sticks can be used in conjunction with SHAFTSTIK Golf Glass Beads when adding or mixing them with a two-part epoxy.
The mixing sticks are the correct size to fit easily into most golf club hosels, allowing an even and correct amount of epoxy to be added to the hosel with minimum over spill or mess.
SHAFTSTIK Golf Glue Epoxy Adhesive Mixing Cards are an ideal solution to mix your glue, adhesive and epoxy resins. They can be re-used and disposed of when finished along with the mixing sticks.
Made from a premium 350gsm grade card with gloss laminated finish to the mixing side, allowing for a smooth mix and minimum epoxy waste left on the card.
SHAFTSTIK Custom-fit Workshop Specification Cards are on the reverse side of the mixing card. Our custom-fit specification card allows you to record golf club equipment data for all individual golf clubs.
Product Details:
Details such as shaft flex, grip size, club-head loft and lie recordings and swing weight. An ideal way of recording your customers or you own golf club specifications before and after adjustments.
Use in accordance with the safety data sheet (provided on request) and/or the guidelines as per the label/s on the product. For further assistance with this product call our helpline on +44 (1952 743 038).
About:
The development, manufacturing and engineering of the adhesives, glues, and epoxy resins used spans four decades and three continents, of which is backed up by a high-tech ISO certified production plant and high-grade manufacturing and research and development facility, with expertise of the highest level.